e Marine

1" Stainless Steel 90 Degree Tee

Canvas Tee Top Kit 200W is designed for installation on center console boat that have a soft Bimini Top. The Canvas Teetop kit is predesigned and set up for self installation, are all-inclusive there-by eliminating equipment guesswork and/or missing parts during installation. The end result is a kit that will install quickly and work once installed. There is nothing to turn on or off, everything is automatic and the batteries will be charged up and topped off ready for a full fun packed day of...

Copper Rod 18" with Adjustable Base

25 Amp ATC Fuse

Used in Automotive and low-voltage control circuits to 32V, Operating Temperature Range -40°C to 100°C, 95% RH non-condensing. Case color indicates amperage rating.  Never replace  a fuse amperage  rating greater than the amperage size being replaced or it may cause physical or personal harm.Ratings:    P/N (amp)     Color codeATC-1           BlackATC-2       &n...

Box of 5, 20A  Barrel 1 x 1-1/4\"

CLASS “T” FUSES Offer extremely fast short circuit response making an ideal circuit protector for high amperage electronic components such as inverters. Extremely current-limiting design minimizes the damaging heating and magnetic effects caused by short-circuit currents.   FEATURES • 20,000 Ampere interrupt capacity • 160V DC Maximum • UL Rated for DC applications under UL 198L ...

Ground Rod Clamp 1/2" or 5/8"

Maxi Fuse 50AMP/ 32 VDC

1.5" long Copper Nail

Hybrid kits are the best solution for renewable energy on board your vessel.  The combination of solar PV power during the daytime combined with 24 hour wind capability optimizes energy production in most weather conditions. The air X wind turbine is equipped with high performance carbon fiber blades which allows it to operate whisper quiet with improved performance in low winds.  Kits are all-inclusive allowing easy installation. Hybrid Wind/Solar Kit includes: 2 Solarland 85W Solar...

Maxi Fuse 60AMP/ 32 VDC

Copper Conductor Clamp

Fiberglass Teetop Solar Charging Kit Includes Solarland 160 Watt Panel is designed to work with a nominal 12 Volt battery system with either flooded or AGM type batteries. Fiberglass Teetop Solar Charging Kit 160W is available in two versions:--> Fiberglass Teetop Kit: Kit includes the 160W solar panel (with easy connect water resistant terminal box), four "Z" mounting brackets with hardware, 30' of 12-2 Marine grade wire, 6' of 10-2 Marine grade wire, 6 amp Charge Controller (regulates...

30 Amp ATC Fuse

Copper Ground Rod 10' x 5/8"2 x 5' with coupler

Box of 5, Barrel 1 x 1-1/4"10 Amp, 20 Amp, or 30 Amp.

35 Amp ATC Fuse

Maxi Fuse 30AMP/ 32 VDC

Optional 15' plug-in extension cord works with kits: MKS24040A (10W); MKS24041A (20W); MKS24042A (30W). Easy way to extend wiring to your solar panel.

Box of 5, 30A  Barrel 1 x 1-1/4\"

Maxi Fuse 40AMP/ 32 VDC

Canvas Tee Top Kit 160W is designed for installation on center console boat that have a soft Bimini Top. The Canvas Teetop kit is predesigned and set up for self installation, are all-inclusive there-by eliminating equipment guesswork and/or missing parts during installation. The end result is a kit that will install quickly and work once installed. There is nothing to turn on or off, everything is automatic and the batteries will be charged up and topped off ready for a full fun packed day of...

Hybrid kits are the best solution for renewable energy on board your vessel. The combination of solar PV power during the daytime combined with 24 hour wind capability optimizes energy production in most weather conditions. The Rutland 1200 Wind Turbine is equipped with a powerful but quiet operation of the new Tri-namic Blade that brings together low wind speed start up with high wind speed power performance and almost silent running across all wind speeds. Kits are all-inclusive allowing...